What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 04:16
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–10[John johnson John Johnson ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
Best Buy CEO raises red flag about startling customer behavior - TheStreet
A fuse is a non-resetable over current circuit protector.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Barnstars:
Have you ever had a bad gut feeling about someone and it was right?
What is lightning?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
One is “what exactly is in a ‘surge protector’ ? ”
Scoop: Treasury officials defend "revenge tax" from wary GOP senators - Axios
This is the picture of an electronic coil of wire wound around a core of magnetic material.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
ESA’s new asteroid hunter opens its eye to the sky - European Space Agency
One
nine
but this device (an Inductor) … impedes the rapid changes in the current.
Massive iron reserve worth trillions discovered could reshape the global economy - Glass Almanac
In schematic diagrams this is the symbol for a fuse:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The third is lightning and “how it gets conducted into a home.”
Nvidia CEO Pays Tribute To Late Nintendo President Satoru Iwata In New Switch 2 Video - Kotaku
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
He then describes the function of a fuse.
This one hit behind the barn.
Rare ‘Einstein zig-zag’ sheds light on universe’s hidden forces - The Brighter Side of News
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
He then asserts :
But it can get overloaded, and no longer works.
Why do you think Democrat favorability ratings are so low?
Edit 2024–10.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
At least they know the answer if they wanted it.
Are miracles real or do they just have natural explanations?
The other is “what does a “fuse” do?”
This is where this question deviates from being a 'generic' question, and becomes more specific.
What does a fuse do?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Upvotes:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Scientists Just Found the Oldest Barred Spiral Galaxy – And It’s a Monster - SciTechDaily
(Dc diagram shown, AC is similar).
An AC voltage/ current source, and an ac inductive load.
At one ohm, the resistor has a maximum of 1 watt power.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Because the load is inductive, the current lags the voltage.(by a bit).
I post the exact comment here.
What's your take on Eternal Sunshine of the Spotless Mind? How has it affected you?
[image of Common-mode choke]
eight
so, what happens?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
The bolt then partially travels down the line to your home.
what exactly is a ‘surge’ protector?
This is 'the assistant's answer'
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–14 [Omar Gharbi Omar Gharbi ]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
A circuit breaker is similar, but is resettable.
This device then solves the entire problem.
For this case there are devices called Metal oxide varistors (MOV).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The MOV will conduct when the voltage exceeds 50% of line voltage.
First Sentence:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
These devices are installed between the “hot” and “neutral” and protective ground.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
But… the neutral is now “floating” because of the 1 ohm resistance.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is where the MOV conducts again, and dissipated the energy.
but I think this circuit , shows a few more pieces.
the problem then depends on "how fast does the fuse operate?".
[old diagram got deleted by accident]
There are three different concepts here that are getting confused.
2024–10–16 [ OO OLAOYE OYEBODE ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
There are two important concepts here.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It seems Mohan does not understand the difference between a comment and an Answer.
He then describes Rainy Season and Lightning.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It also is a device that limits the change in current flow.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
a photo is worth a thousand words.
Here is a simplified AC power diagram.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".